Bench top sterilisers need to be fed with pure water to operate. The water must be free of impurities, as this can affect the cleaning of instruments, cause scale build-up on expensive equipment and prevent cross-contamination. This area is considered critical as it falls under the guidance given in HTM 01-05.
Particle Removal
Prevents debris, scale flakes, dirt and particle build up in pipework, tanks, equipment and where present, premature blinding of filtration stages further along the cascade.
Bench Top Steriliers
Typically used
PTL-SSPECTRUM PTL-Head System
Typically used
PTL-FH2Chlorine and Organics Removal
Helps the taste and odour of the liquid and where present, protects RO membranes from chemical attack.
Bench Top Steriliers
Typically used
PTL-HFSPECTRUM PTL-Head System
Typically used
PTL-FH1Deionisation
Helps the taste and odour of the liquid and where present, protects RO membranes from chemical attack.
SPECTRUM General Purpose DI Resin
Typically used
SRDI-RESIN-25LSPECTRUM Standard Pressure Vessel
Typically used
SV-FK-817CBacteria Removal
Reducing the levels of bacteria to log 7
SPECTRUM Deionising Resin Cartridge
Typically used
SRDI-RESIN-25LSPECTRUM Standard Pressure Vessel
Typically used
SV-FK-817CTDS Monitoring
Devices that measure the conductivity of water between 2 probes provide a good indicator of the ions and salts content.
TDS Meter
Typically used
TDS-DM2Featured Products
Bench Top Steriliers
Find out how Fileder can assist with your water treatment and filtration requirements within vehicle washing including bench top sterilising.
SPECTRUM General Purpose DI Resin
The high quality mixed bed resin, SPECTRUM SRDI is designed to ensure the highest capacity and most efficient operation to create pure deionised water.
TDS Meter
TDS meters are used to measure the levels of Total Dissolved Solids (TDS) in a given volume of water, an essential factor affecting filter performances and required in the correct set-up for reverse osmosis systems.