How often should a bag filter be changed? It’s a question often asked, and unfortunately there’s no fixed answer. Filter bags vary in durability, and durability is dependent on the contaminant load, flow rate and application.
What we do know is that frequent, unnecessary bag filter changes interrupt operations and increase costs. However, failing to replace your bag filters regularly enough can leave them clogged, which can impact filtration efficiency and cause wear and damage to the bag filter.
Of course, it’s worth checking product specifications as manufacturers may give guidance on how often to replace bag filters. Whether or not they do, it’s still important to carry out checks.
Some filter bags, such as Fileder’s Spectrum range, can be cleaned and reused, so when we talk about replacing bag filters, this includes swapping a used bag for a cleaned one as well as a new one.
Signs Your Bag Filters Need Replacing
Industry Requirements
Before you even look for signs of a problem, it’s important to check whether industry requirements apply. In some applications, industry standards may set a maximum time a filter bag can be used before being replaced or cleaned and reused.
For instance, in hygiene-critical applications, such as food and beverage, cosmetics and pharmaceuticals, bags may need changing at regular intervals to reduce the risk of contamination or bacterial growth. Bag filter changes may therefore be set by food safety or quality procedures, regardless of how well the bags appear to be performing.
Changes in Pressure Drop
Pressure drop, also known as pressure differential, is the reduction in fluid pressure as it flows through the filter. Pressure is measured by gauges on the inlet and outlet of the housing, so the difference between those values is the pressure drop.
Some resistance is normal: this is your filter preventing solid particles and contaminants from getting through. However, when the pressure drop increases, this can be a sign that clogging has become a problem. The dirt load in the bag filter may be slowing the flow of liquid, and this can cause premature wear, reduce filtration efficiency and increase energy consumption. Typically, the manufacturer will provide a maximum operating pressure differential in the product’s specifications. When the pressure drop reaches this level, it’s time to change the bag filter.
A decrease in pressure differential can also signify a problem. If the pressure differential falls, it could indicate damage to the filter bag, causing the fluid to pass through without being properly filtered. Alternatively, liquid could be bypassing the bag because it isn’t seated correctly in the housing or the seal has failed.
So, when monitoring for signs your bag filter might need changing, you’re looking for a change in the pressure differential: an increase or decrease outside the normal operating range for your filtration system.
Decreased Flow Rate
A fall in flow rate can indicate that the bag filter needs changing, but this isn’t always the case. Sometimes the flow rate can decrease due to blockages or restrictions elsewhere in the system, or if there is an increase in liquid viscosity. So it’s wise to rule these causes out first.
However, if the flow rate has fallen and the pressure drop has risen, this strongly indicates that the bag filter is reaching capacity and needs to be changed.
Visible Wear
The bag filter is not usually visible within the filter housing. However, it’s wise to schedule regular visual checks of the bag filter itself. These needn’t be overly frequent or time-consuming: just a brief visual inspection to check the bag for tears, thinning and other signs of wear. It’s also worth checking the bag’s seal to ensure it’s seated correctly.
Reusable bag filters can be inspected whenever they’re removed for cleaning, and any showing signs of wear should be replaced rather than refitted.
Insufficient Filtration
Insufficient filtration is the last sign you want to see, as this means contaminants are reaching the filtered liquid. If you’re finding that sediment, lumps or contaminants are making their way into the filtered liquid, then the bag filter may be at capacity or even damaged.
However, this can also occur when the micron rating of the filter in use is too coarse for the application, so ensure you consult product specifications to rule this out. Another possibility is that the liquid is bypassing the bag filter, so check that the bag is seated correctly and the seal is intact.
If these causes have been ruled out, the bag should be changed, or replaced if it’s damaged.
How Often Should You Check Your Bag Filters?
How often you should check or change bag filters depends on the application, contaminant load and the level of filtration required.
For most systems, monitoring pressure gauges is the simplest and most reliable way to identify potential issues. Recording readings over time can also be highly useful in establishing a normal operating range. These records can help operators work out how quickly the bag filter reaches capacity and plan changes accordingly.
Checking that your bag filters are performing well is really about the ongoing monitoring of pressure drop and flow rate. It’s also wise to carry out visual inspections when changing or cleaning filter bags to check for any signs of wear or damage.
Are you looking for the right filter bags for your system? At Fileder, we have a range of quality bag filters with the capacity to hold up to several kilograms of contaminants. See our full range of filter bags.





